What to do with water heater and water softner when draining water from plumbing?
What to do with water heater and water softner when draining water from plumbing?
What to do with water heater and water softner when draining water from plumbing?
Hello! I may have a problem with water hammer or pockets of air or whatever in my plumbing system. In order to troubleshoot, I want to drain the water from the pipes for the whole house and then refill it. What should I do with the water in water heater and water softner? Do I drain the water heater and water softner? Just turn power off on my Kenmore water softner? or use bypass valve? Thanks for your time!
turn off the heater. shut the valve to prevent siphoning. by-pass the softener. install water hammer devices sold at your hardware store. you may need a few if four house is big. if you need to you can use compression fittings or tiger gripps.
DIY Water Softener Install
[SMP_MESSAGE]
[SMP_MESSAGE]
Related posts:
- Can a water heater be retrofitted with a drip pan after installation without removing the water heater unit? I have heard of base-surround retrofit enclosures for a water heater but have not been able to find anyone that manufacturers or installs these types of systems. Anyone have any ideas of how to retrofit a water heater with a drip pan after it has been installed without removing the unit? Admin @ www.HeatingForHome.com [SMP_MESSAGE]...
- Gas water heater, if I turn my water heater on vacation, why do I hve hot water ? Gas water heater, if I turn my water heater on vacation, why do I hve hot water ? Gas water heater, if I turn my water heater on vacation, why do I hve hot water ? I am trying to save money, so I turn my water heater, located in my garage to vacation when [...]...
- I have a electric mobile home water heater that is leaking at fitting where the hot water connects? I have a electric mobile home water heater that is leaking at fitting where the hot water connects? I have a electric mobile home water heater that is leaking at fitting where the hot water connects? I have a electric mobile home water heater that is leaking at fitting where the hot water connects. The [...]...
April 26th, 2010 at 1:08 am
turn off the heater. shut the valve to prevent siphoning. by-pass the softener. install water hammer devices sold at your hardware store. you may need a few if four house is big. if you need to you can use compression fittings or tiger gripps.
April 26th, 2010 at 1:08 am
To correct a water hammer problem it is not necessary to drain the water heater or softener. By draining the pipes to your fixtures the problem should be solved at least temporarily.
April 26th, 2010 at 1:08 am
Turn off the power supply to the softener and water heater. I see no reason to drain the heater as the water will push out any air. If you install anti-hammer devices, do not use compression type fittings in areas where the units will not be in plain view at all times. Most codes prohibit this.